I did a trial assembly last night, I was slightly concerned about how I was going to unscrew the old rebound assembly from the damper shaft but it...
Of course I had one of those, back in the day. Well, not really. But it was the same colour and a V4 so that's got to count for something. Enjoy...
OK...I know I said I would leave the forks alone, but I just couldn't help myself, and went back to Brook Suspension and hit the buy-now on some...
This has become one of my standard practices with old(er) bikes, pull all the fuses and all the connectors, clean any tarnish off and then spray...
I might be wrong, but my expectation is that there is an H4 standard which prescribes the 3D exact location where the two filaments have to locate...
I'm not sure about the US market bikes but our locals came with 45/45W H4 bulbs, with a different pattern of locating tangs compared to a standard...
We are having a lovely sunny winter day here so I pulled all the toys out for a family photo. They all got a little run around the block to...
Ok, I've got to ask...who is Erika?
I also use (and like) EBC HH pads but they do make noise when you use them; I don't notice any excessive noise from them otherwise. Definitely a...
That's not right and suggests the thermostat is not moving. The thermostat should stay closed and keep the coolant circulating just around the...
We're in the 8th gen forum here; 4-piston radially mounted callipers here so no sliding mounts involved.
Sorry; you really need to undo the banjo bolts and get those callipers onto the bench. What you can do (and this will sound counterintuitive) is...
"when the bike is running with the cap off it just dumps antifreeze on the ground in a pulsing pattern. If I burp the throttle the antifreeze...
The impellor is driven off the crankshaft through gears and a coupling shaft. I have heard of one case where the coupling had sheared (bad...
Some good diagnostic info there. When you crack the nipples nothing changes so you know hydraulic pressure is not the problem and replacing pads,...
Purple Ice is a corrosion inhibitor so the benefit will be to keep cooling system surfaces cleaner for better heat transfer. If your cooling...
I highly doubt that the different coolants will provide any measurable difference. They should both be 50:50 ethylene glycol and water as a base,...
Not so fast there chief. The coolant expands when hot, so some has to go to the reservoir otherwise all the hoses would probably rupture. The...
When I refurbished my 6th gen I fitted some wheels that had been stored for a few years. Even with completely rebuilt callipers and master and new...
Your procedure for getting the FI into diagnostic mode sounds flawed. On the sidestand with the engine idling should generate blinks. Or with the...
Separate names with a comma.
