Good Point! I bought a 1.3 bar cap...set aside the 1.6...
Check my update post previously....for coolant I use the OEM Honda Type 2, bought direct from the Honda auto dealer. I also like to add 4 ounces...
Probably should get a new rad cap..a mbe,..thinking out loud...the one you have is acting like its wide open and not sealing, so it allows minimal...
When you first start it up, look to see if the reservoir is filling up... that would be a clue. Need to investigate when the reservoir is filling..
Thanks for that! I'm going to try that! I can do another teardown if needed later..- There's other fish to fry on this bike. It hasnt been started...
I did use silicone lube grease...brand is Super Lube..Also used it on my Valkyrie brake rebuild and no issues......
I got the brakes done ...not going to describe all the gyrations to get there...brake lever is decent... So a question?.....the brakes are...
The body is completely off for exactly that reason...
Dunno what I can add, but I do know the full reservoir is goofy wrong... more digging required...Double check.... there is a hose that is high on...
Havent had any problem with aftermarket rad caps.... Trying out this higher pressure rated one.....
Looking good!
Dunno if you misinterpided....just saying I'm happy to see this thread...I was following from VFRD.. :)
Adding a new higher pressure rated radiator cap is a worthwhile thing to add too...
Excited to see how this thread goes! Very Cool! :thumbs:
I have a f4 or f3 caliper and bracket if you want it....(dont remember which one it is.) Proly needs a rebuild....
I host all my photos on SmugMug, a pay service. It works on all the forums I'm on.......except here! (Sucks) I would post more here if it did.......
This! Strip the OEM lock tite off the new bolts and then use a blue lock tight instead.
Very wierd. 31nm or to me 22 ft-lbs is normal stuff.... how is the calibration on your torque wrench?
I emailed him about the data, he hasn't responded yet.
Agree...the software format was much more user friendly, photos could upload from a 3rd party site, and had emojis.
Separate names with a comma.
