I found that CBR 600 F3 or F4 footpegs will work on a Gen 4 if you do some filing....springs work too.
You should see from many posts here that sometimes thermostats stick either open or closed........ The thermoswitch that turns on fan commonly...
Sometimes it helps to pull the clutch lever in when starting....make sure the green neutral light is ON or wiggle the shift lever until the light...
Check the plug connector from the ingniton key switch also. Check where wires meet the starter solenoid because sometimes that area melts/ burns
Alison Krauss.........
most original Honda shocks are good for only about 25-30,000 miles before they get weaker.
So right!! less dense air reduces heat transfer from radiator to air
Replace the nackered disc, and keep the good one......
Probably nothing to fret about, normal. OR you can cool down the engine before your ride ends by crusing at a MODERATE speed (25-30 mph) for a...
many types of soldering irons can work ( use broad "v"-shaped tip) to melt and fuse broken plastic too. Experiment on scraps, and use lots of...
Not sure a valve would develop a noise inside a narrow temperature range only??
I heard that the SSSA was developed to ensure that graduates from the Motorcycle Mechanics Institute ( and other hacks) couldn't get the rear...
OHY, Please, not heroin!! you, sir, are mistaken, cuz dat shit be BAD for man or beast!!!
WHAT'S in?? a mouse's nest complete with mouse poo & pee and a masticated air filter..... MY little VTR 250 has rubber velocity stacks......
i believe the trend may have been started with the Ducati 916
the solder connections between the wires and the switch contacts ("start" pushbutton) can sometimes break, in which case contact cleaner won't help.
what he said......starter switch button :a common problem
ONCE again: the headlight circuit is powered through switch contacts inside the "starter" push button, so if that button is sticky or does not...
I found a quality, durable epoxy coating: "epoxy gas tank sealer" www.caswellplating.com Worked well and easy to use, far better than...
Separate names with a comma.
