Kissing rich-folks' asses can't be a good job.....at least your driver's license wasn't suspended !! You may be unusually fixated upon the...
Don't spend more money fixing it than the bike is worth.....just use the money to get a newer bike. BTW......just about ANY bike over 250 cc...
never use ANY choke if the bike will run without it........ and if it won't you need a carb cleaning. IT's easy to flood the sparkplugs with...
OBSERVE Caution: Some of those high-end cleaners can and WILL live nasty spots on alloy parts if not washed off quickly and thoroughly. Wash...
IF you're using aftermarket lights made in Taiwan or China, expect your problems to be caused by poor workmanship ( bad solder joints) or poor...
At that mileage, if not done previously, the steerings bearings should be serviced: cleaned, inspected re-greased, adjusted.........or replaced.
Clicks or clunks on stopping can be worn steering head bearings or normal brake pad movements within the caliper.........or someting else???
SOMEONE always has a point to make or to prove. At least we don't have some geek with laptop full of equations developing a super- or...
Naturally, i'd recommend replacing the bike, not the gasket. The bike is way old and is giving you notice that it wants to retire. After the...
Now THAT'S a great offer, that is !!
Generous offer, but.......(link didn't work) HOW about doing a compression or leak-down test before shipping just to check out the condition,...
most or all front stands let you remove wheel but NOT the forks or steering stem, therefore only a partial solution.
Are the shims marked with thickness?? He doesn't even have a micrometer.
MORE pix of lift....... both wheels up, no special stands or fancy equipment.
THIS works for me, and i've done it many times without incident: You can get both wheels up using a 6" 2 X4 across the centrestand mounts with...
using lube on the boots is a good idea, but DON'T use axle grease. brake fluid is slick and won't attack rubber. it helps to slip all mounts...
Dija know that Gen 1, 2,and 3 wires-- almost everywhere in the system--are substantially thicker than later gens?????? Seems Honda got more...
shoot a bunch of PB Blaster around the area of the ring and the split next to the pinch bolt. after removing pinch bolt use a thin blade as a...
I'M all for riders working on their own bikes and not getting a shop involved and for learning about their bike in depth......so, first thing you...
Just wondering....... OK.....why does someone buy an old bike that does not run??? That bike's not old enough to be a real antique and not...
Separate names with a comma.
