OK!! VF-series owners.....Here's your chance to step up your technology--while still staying in the family-- to a far more modern level at a...
Carb service specialist With over 30 years experience working on carbs from exotic sports cars, SCCA race cars to bikes, and having owned...
The "glory years" didn't start until '86, after Honda fixed the upper-end oiling problem and initiated gear-driven cams.
Melted connections both at the starter relay and at the 3-wire connection between stator and R/R are the most common failures for charging...
IT'S a beautiful country, and in a friendly gesture of support, i offer to dispose of 1 bag of garbage for any Toronto-area rider during the...
Show me a clean rear wheel and there's a bloke who either never lubes his chain or just finished washing his bike !!
Knees -down is a dangerous way to go in street riding cuz it generally means you're going way fast. ALSO, the farther you're hung off the bike,...
i just took a close look at a few defunct thermoswitches in my collection of crapped-out parts off 2 or 3 Honda models including VFR and saw this...
parts wear is based mostly upon mileage acumulated, so how many miles ( or kms) on yours?????
Probably no need to drain coolant to replace temp sender ( not thermoswitch) cuz it's way up top, and you won't lose more than a few oz of...
EXPECT to replace 3 or 4 alloy sprockets for the same mileage as steel. They don't last well. THE tool sold by Motion Pro that does it all is...
CAUTION: Bike must be up on centerstand and front end blocked up so that front wheel is off the ground before opening fork caps.......
THAT was a really dumb thing to do, and now you're paying for your immaturity, sorry ! I suspect you was 'a drinkin,' zat right ??
OH, god, again??? Corrosion takes time, and a 10 minute flush with tap water won't hurt anything !
AS stated...... bottom of waterpump, 10mm head, small copper washer underneath. It's good to let a garden hose run for a few minutes...
IT's OK to jump off and push it back !! Don't start lowering things before you put some miles on the bike first, because you'll feel more...
It's a great idea to fully drain your tank at least once a year and shake out/wash out whatever scum has lodged on the bottom.
You'll need to use a tap to chase the threads in the rotor bolt holes, and it might be best to leave wheel bearings in.......prior to removing and...
Gen 4 is the last CLASSIC VFR. Gear-driven cams have always been at the heart of a VFR, so don't do without them. If you fear wrenches and...
check to be sure all the bolts holding the sprocket cover to engine are tight and also the bolts holding slave cylinder to that cover.....
Separate names with a comma.
