ANYONE who thinks i am blaming TOE CUTTER for anything (other than being a reckless golf cart driver after dark) didn't see the deeper question...
IF you look AWAY back in the archives, i think you'll find that the lower fork bushings on gen 4 fit too loosely to the outer tubes, causing some...
happy ground squirrel day !! [img] [img] [img] \[img]
A question for debate: is the bike owner solely responsible for his tyres or is the shop that has done work on it ?? TOE is just about the last...
From Kevin Ash's website, a British journalist: Honda VFR1200F | Ash On Bikes The VFR750 reversed the dreadful reputation for...
This is from the website of Kevin Ash, a British journalist: http://ashonbikes.com/content/honda-vfr1200f#comment-1270...
Honda did that on 4th gen bikes, and if it worked on yours, you'd have it.
Something to remember is that you should do the adjustment while using high beam only. Once that is properly set ( just very slightly below...
WHAAAAA??? A positive result is not good news on an AIDS test !!
AND yet another 500 bites the dust.........
GREY VF, usually quite accurate and very well-informed, means 7 mm, not .7 mm, i believe.....and misplaced his "." Good idea to replace all 4...
THAT'S bottomed all right !!!!!!! Hard to understand when springs are always pushing up.....
It's been established that the forks won't move...... but no real evidence they're stuck in the fully extended or fully compressed or part way in...
His, but probably for yours too.....unless they measure pressure differently north of 48, eh ??
I'd suggest ABOUT 33 front/35 rear (cold).....40 is too much for your bike, especially up front. ( no passenger or baggage)
chain is OK but you'll need to rotate adjuster forward to set tension..... avoid alloy sprockets as they wear FAR quicker than steel.
You gave her your best efforts......and she blew up in your face, and you want to put another used engine in place with unknown miles and what,...
530....108 links.....don't forget the sprockets....15/43
Inspect your axle for any grooves or visible marks. Also test for wear in the bearings by inserting the axle into each side of the wheel (...
Them Communist AllBalls is fine, just fine...... if you change 'em out every 5000 miles or so.
Separate names with a comma.
