New sprockets should be installed with new chain....... An 8k mile chain would be a standard, non O-ring, and be due for replacement.
A series of tight and loose spots usually indicates a worn out chain. Any chance that your dealer sold you a non O-ring replacement ???? Stock...
Float level gauge made from a credit card.... VFR Discussion -> Gallery -> Viewing image -> float height gauge
[] "He changed coolant over a year ago. I highly doubt there's air in his system still." Can't agree, Tex, cuz the level of coolant should...
Sure your choke cable is not stuck and keeping partially on ??
Best results are with Honda OEM seals, not aftermarket. Good luck
Different water pump won't help. Your cooling system could be underfilled or have air pockets.
AND you're sure the float bowl vent tubes are open and clear ?? TRY resetting floats to 8mm just for a test.
SO....when you had the head off, did you see any vertical scratches on any cylinder walls ??? Ring replacement requires total strip-down, but...
Most speedos on later bikes drive off the front sprocket, so no change......
Only need to replace clutch if you notice slipping---- the tach goes up but the speedo doesn't. Did you notice a reduction in power to the...
ALSO....consider a '88-'90 NT 650 Honda Hawk, extremely EASY to ride, lowish seat, light weight, great handling, reliable, economical and has the...
Yes, it's an " F" model: note that Honda did not designate it as "F1" How many miles on her, and how does it run ?? Mind saying what you...
ALSO......there should be an aluminum washer under each float needle seat or fuel level could be changed.
I don't follow your reasoning cuz the slides, whether they rise or don't, should have NOTHING to do with a rich idle speed setting as long as they...
Don't fret about that .001", and do not heed any who suggest the valve won't seat properly. If your .008" feeler was loose, then consider...
Try turning mixture screws in--not out-- with engine running until you cause each cylinder to stumble and loose power.....then back screw out 1...
ANYONE who would rather trust carb work to a professional........... <<<<<<<>>>>>>> With over 30 years experience working on carbs from...
If you're sure the carbs are good and the plugs still foul, you'd need to check the air filter for being blocked by dirt. If you run the bike...
Separate names with a comma.
