You could have stock numbered jets, but some wanker prat migtht have drilled the holes larger. Carefully clear out all the holes on the sides...
Make sure the slider pins are well lubed and move freely. Possibly warped or bent disc.
WHAT, you mean the federal govment hasn't regulated the toxic , noxious discharge horse shit yet , unbelievable !
The antidive seems moderately effective, seems most are set to #3.
(WHAT ?? Those periods are using up too much precious bandwidth or takin jus too long ta read ?? ) First ride signifies a project completed,...
Maybe mean to replace the third bearing--the one in the hub ??
Start with fresh fuel first. Sooty plugs just won't do. Is it rich at idle or high speed or both?? If you have standard jets and still...
There is just one fuse in the "park" circuit; pull the fuse out, and you won't need to worry about the lights draining your battery.
Apparently delirus is unconcerned about the valve issues..........cuz he's delirus ??
Take the one you can afford to crash........
HOW long have you been riding THAT bike ?? Newish bikes always feel larger, and after racking up some miles, you might gain the control and...
STOCK headset bearings are usually loose and dented by about 25-30,000 miles, sooner if the bike's been wheelied.
Try synching the carbs, and be sure the throttle cables have some slack.
p,p,p,p,please d,d,d,don't remove the airbox bottom from the assembly as it holds everything together......
Maybe one or more vaccum diaphrams not seated properly would be my guess....nothin to do with mixture screws.
Slight variations in engine speed--due to poor throttle plate synch--tend to rock the clutch plates back and forth within the basket, making...
SOAK the friction plates in motor oil for about 1/2 hour.........and don't try over-tightening the clutch spring bolts !!!!
"Screwed the pooch" is the operative phrase, right TC ?? Dude's help and salvation is the official Honda service manual, which should have been...
A classic failure; no, they never fixed it !!
ONLY needs a crank and rods ????????? :peep: SORRY, but that bitch will never run again........it's way too far gone !
Separate names with a comma.
