.......and just what makes this pile "collectable" ?? It's too crappy and mechanically flawed to be a classic.
Get some new boots on order cuz those are well past any practical re-use. It usually helps to concentrate on getting the rears to pop loose...
[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] Car, what car ? No car ! Squirrelman is po, and cars and trucks and insurance for cars...
Good news ! After you get sparks, as suggested above your next issue will be dirty carbs, but you can try to get it firing by using a bit of...
Almost nothing else works as well or as easily as the factory tool.
........which is why it would have been smart to research VF 500s on our site b4 you bought ! But I'm hoping you'll be LUCKY !
Bottle-feed the damn thing with gas into the hose to carbs.
:behindsofa: Since when is mechanical aggravation a "gift "??? Let's hope he graduated as a mechanical engineer. :homer: Did you hear the...
Check for a spark on that cylinder just before getting into carbs, but it does seem like yet another deal where someone clams they cleaned the...
I used to enjoy the UK version but can't get it on my TV now, so i'm talking US show. I think the writing is more clever and inventive.
If you're really that sold on the need for FI, you'll need a newer gen VFR. And a Power Commander to make it work right. Fi is a cure...
I love that show !!!!!! Any other fans here ??
Frequently, problems blamed on the R/R ( or stator) are really caused by dirty/corroded/burned/melted plug connector terminals, usually at the...
First check that all 4 cylinders are firing by lightly touching each exhaust header pipe and finding which are hot or cold. Inspect the plugs for...
[ATTACH] True dat !! One of those f'ups you wonder "Why didn't those smart Honda engineers account for this ?" I refuse to loosen...
Just make sure that the washers under the retaining bolts are placed with the coppery-looking side UP. Also, you should bond the gasket to the...
Brake fluid absorbs moisture and turns to crap after 3-4 years, so above recommendations to flush and refill should go a long way toward...
If clutch plates rattling inside the basket is the cause, then an accurate throttle body synch could be the cure.
Save yourself the expense and frustration: this will probably never be a good-running bike again.
Is your petrol tank clean ??? Rust or dirt in there can get into float needle seat area and hold them open, causing the overflow from the vent...
Separate names with a comma.
