Before digging any bike out of long-term storage it's best to remove sparkplugs and pour about 1/2 oz of engine oil into each cylinder--which you...
NCB has it covered, but if you can find the idle mixture adjusting screws, you could easily dial in an additional 1/2 to 1 turn counterclockwise...
Learn to ignore peer pressure and feelings of inadequacy. Guys who ride them Bustas are nuts. XX is a big, wide, fat pig, and no one with...
[ATTACH] Loosen clamps on both sides, heat gun softens rubber, work on rears first, useful pry points between carb tops and valve cover....
What would cause a freshly rebuilt Fox shock to spew all its pressure and fluid while sitting on a shelf for about 2 years ??
Sorry, my earlier advice was seriously in error. Please visit my website: www.imightbeanidiot.com
Hazzmatt has it right; there is no comparison between the braking ability of steel-braded lines and old, squishy, expandable OEM lines. You'll...
Sorry, i'm an amateur idiot and gave improper advice.
The idle speed adjusting knob ??? Don't people read the owners manual any more ??
Sure you should buy it !! You'll make the guy so very, very happy to see it leave his driveway.
Sure they differ due to the extra cam pulse generator connection. You probably ( i'm not certain) need the cdi from an '87 to make things work or...
Check plugs for a lean condition and flush and replace old coolant, making sure all air is removed from system.
Tinki could have the answer: It's not always easy to get the vaccum diaphrams seated correctly, so check that you feel slow resistance and listen...
Better to patch up fairings than convert to street fighter cuz just holding on at higher speeds and fighting the wind blast is no fun at all.
I don't think your clutch is fully and properly bled, Code. There is still air in the system, i believe.
i don't think your caliper setting method has much validity, but if it works well enuff to get you started, OK. Bench synch works best when all...
Study the wiring diagram, then check that you have about 12 volts going to the CDI wire from the run/off switch. Also check that you have ground...
Good idea. With a proper bench synch, you'll be closer to the best starting point.
I know EXACTLY how to fix your problem, so see and heed my advice above. Find the one connector plug and begin work. Once plugs are apart,...
In practical terms, there are very few non-running VFs in good enough condition now for economical "restoration," as newer, better bikes are...
Separate names with a comma.
