Sure enuff: that starter relay plug is always a suspect in cases of electrical chaos.
Chain wear happens mostly inside the rollers, on the pins. A good measure of wear is how far a chain (off the bike) will flex sideways compared...
Test the battery with your multimeter ! Multimeter (volts, ohms, etc.) ownership as well as a battery charger is absolutely required for Honda...
You'd probably get better info at the Sabre/Magna website, eh ?? http://www.honda-v4.com
Chains are not measured in mm's as that would confuse things for no good purpose. Size and number of links is all that's needed.
NO ! Those caps were required by the US government, so F* them.
Seems our Billy's hungry for p***y again. BMW sold tons of bikes after the Wall Street Journal published a photo of Steve Forbes on his.
Reverse current leakage points to a failed diode in the r/r, so look for a replacement unit. You got bit, he got bit, she got bit, they got...
I'd only use a top-rated shop which had real, verifiable expeience doing valve adjustments on a VTEK and could show you the special tools required...
It's nuthin, mate. I'd like to be a foot taller; but if not possible, i'd wish to be Australian, cocky bastards they are !
I'd like to place an addendum to this highly meritorious thread, as follows: Sometimes playaz say "I knows dem jets beze clean cuz i saw...
Good choice avoiding Chinese crap "AllBalls." But the way things are now, it's possible your Timkens were outsourced to China too. How many...
You probably missed cleaning the idle jet on that cylinder proppaly. Cleaner spray and compressed air work in only the least-clogged cases, while...
^^^ That's electrical, like an ignition coil or pulse generator or maybe CDI box screwing up. Hey, there's a nice VFR just across the border...
So you never checked the resistance across the fuel pump wires to determine conclusively if your pump might work (low resistance) or will never...
3 psi is normal. The exact same Mitsubishi pump was used on a vast multiple of common Japanese bikes for years during the pre-FI era, so i'd look...
It didn't happen !! Everyone knows Honda eliminated fueling problems when they ditched carbs in favor of their impossibly over-complicated Fi...
Be sure to check coolant level again after the bike has run for awhile (and has cooled down) under the radiator cap, not just the overflow bottle....
Some had carb springs that were different length front and back; and if so, they could be wrongly installed. Just a guess. Is it snowing yet ?
7 or 9 ?? Interesting question !! If your plugs look darkish, try 9. Whiteish, try 7. It's an enduring mystery why Honda speced two...
Separate names with a comma.
