[ATTACH] I must slightly--but most respectfully--quibble with Grey re plug color as i can see the optimal Cadbury light milk chocolate...
Idle jets must be screwed in tight, but idle mixture screws should be about 2 1/2 turns open from closed (fully clockwise). If all throttle...
That's not a good bike for people easily frustrated, lacking tools & some mechanical experience or depending upon it for basic transportation....
a baffle is loose inside.
BEER !! Did it again !
u didn't mention, stock exhaust and air filter ?? It's not a vaccum leak.
Less leakage if you use the centerstand when it's parked. :homer:
Sounds like more trouble and expense than it's worth. That bitch has "partsbike" screwled all over it, doncha see ?? Frame might be damaged and...
Parts ?? Replacing the float bowl gaskets would be a good idea along with the new boots.
there is another set of 4 spring behind the clutch basket that can break and cause judderrrrr issues.
^ ^ commrad had you covered !
Yes, it seems you've proved that the engine needs just one more thing to run, fuel from the carbs. If you can't get fuel from the tank to the...
Sorry for your loss. But, NO, not another fickle little whorebitch breaking a young man's heart and part of his bank account too, again, please...
And it was running fine ?? Only time i saw that coloring was with high-$$ race fuel. AW !! Ya fooled me for a sec, but i see a paint can...
He sure is, within his specialty,the best here with shocks and springs, etc. But he won't touch carbs with a 10 foot pole, so there's SQUIRRELMAN...
Nuts ?? :party: [ATTACH]
Agree with above ^^^as a likely cause. Or maybe a sensor, somewhere ? No code flashes ?? It's your FI, kid,:nelson: so either get used to it or...
Hold on, cowboy; that ain't right !! In order to actually control idle speed the adjustment screw MUST come to rest touching the stop.
Counter-clockwise is a richer idle mix. Instead of using book specs that are set for low emissions USA standards, most VFRs run better at lower...
Separate names with a comma.
