The mileage needs to be stated, please. Get it up on the centerstand and spin the wheel by hand. Some pad drag (noise) is normal, but feeling...
With our crap ethanol-added fuel carbs can clog in a matter of weeks unless you open the drain screws before periods of non-riding.
Loose or corroded ground connection ? Clean the connection under the tank that goes to gauge. No other voltage reg.
Check to be certain that the 2 rubber buffers are in place at the sides of the petrol tank.
Test for sparks on all plugs first. Could be bad CDI, bad ignition coil, or bad pickup coil. If you do have good sparks, probably time for a...
Since that adjustment needs to be done with engine hot and running, use a glove to protect your hand. Remember to follow the ExACT sequence of...
Hot, overworked pump suggests no (or insufficient) fuel is getting TO the pump, so suspect kinked line, plugged filter, anything that reduces flow.
[ATTACH][ATTACH][ATTACH] This bitch needs new pistons cuz it froze up during prolonged storage and was my main hobby before i got interested in...
Can't rely much upon Honda fuel gauges as they're grossly non-linear in the readouts. Usually shows more fuel than you have until it gets to...
Now that it's working OK, place a mark on the overflow bottle where the level sits when the bike's cold. If that level drops, it shows leakage...
If the cap is bad loss can be out of both. Finding the coolant level consistent in the overflow and 1" below the filler neck means there are NO...
[ATTACH] It's nuttin' really....
Clean off whatever dirt or bugguts build up on the forks after every ride to help preserve seals.
OR, if TOE's too occupied or disinclined, send the boxed carbs to me for inspection/ repair if you've decided your problem is due to carb issues....
All 4 slides should rise equally while the engine is running in response to throttle opening. If any throtttle butterfly moves uncoordinated from...
[ATTACH][ATTACH][ATTACH][ATTACH] If you're like me and against spending money ever, you can improvise a wheel removal setup with a common...
Accomplished Honda racer and multi-year regional champ, Roger Heemsbergen operates the Arroyo Seco racetrack near Deming and teaches riding too....
Stock OEM head bearing sets are almost always well knackered by about 35,000 miles and crying for replacement.
Any veteran rider like you deserves a special Advanced Member designation, and we're extra-pleased you joined. :party:
With all those farmers there that need to repaIr the hydraulic stuff on their equipment you should be able to fine someone capable. You'll...
Separate names with a comma.
