It's smart to disconnect the battery before doing any additional wiring.
I'll begin work as soon as they arrive, thanks ! :smile:
A rusty fuel tank can shed flakes that hold the float needles partially open.
It's only necessary to separate the carbs from the airbox base if there are leaks from fuel crossover tubes; otherwise leave carbs together for...
Those marks are common. Be extra, extra careful not to over-tighten the spring bolts !!
Switch to carbs !! :behindsofa:
Place the back of your hand against each exhaust header about 30 seconds after you start it. Hot ones are firing OK. Hesitation would be normal...
Are the carbs getting fuel ?? Open bowl drain screw to check. If you have fuel, then the carbs need a proper cleaning........along with the fuel...
Most new bearings aNd seals run fine for awhile........ until they don't. :sad: Japanese-made parts last longer every time and will always...
A compression test would be useful if you want to learn more about what the bike might need in future......or not ? The Trasher might be fixed by...
A new grip can put too much pressure against its left side, against the switches, and bind up; or on right side against bar-end. Must be...
Reverse-current test numbers might be excessive with a bad r/r. No charge when running and a drain when parked. A well-charged battery that is...
Thanks alot. I got the box today in good condition, and i appreciate the extra things !!
Yo, Mark !! Could you tell me when i'll get the parts i ordered and paid for ??? It's been long enough !
I've gotta admit to dropping relayless bikes several times (engine running) without any fires.
Seems like your problem is within the electrical part of the switch, not the mechanical. Remove ignition switch from the bike, and separate the...
:welcome: You'll need to keep it a secret from your retard HD buddies, eh ?
You really don't need that relay ! :playful: That failed relay was the first problem i ever had with my '86, and i decided to eliminate it and...
Serious mistake, probably avoidable if you studied the pix in FSM or looked more closely when you were takin stuff apart. Best to tighten tube...
Key number can be found under ignition lock, under filler cap, near helmet lock. Your nearby Honda 'cycle dealer can make you a new key for a...
Separate names with a comma.
