Send me a PM IF you want me to replace your O-rings, not an easy job. I'll do it for about 1/2 what a dealer would charge, and i have the rings...
pull off the valve covers and have a look-listen while cranking the starter motor over. check valve clearances. you'll need to remove the...
unless you marked them b4 disassembly, it's too easy to interchange the input/output lines to/from the pump, so maybe switch them over.
just bypass the damned thing so your fuel pump doesn't crap out at night on a dark, fast freeway in the rain far from home !:Cry:
with new float needles and new bowl gaskets, only one source of leaking fuel remains: the O-rings on the fuel distribution tubes. Not at all an...
any bent or crumpled oil cooler or rad fins need to be fixed for optimum cooling
As above, bike should start and run on battery power alone if you have at least 12.6 volts . Suggest you go to the plug on the cdi box and...
as others mentioned, your chain may break unless it's adjusted for proper tension at the TIGHTEST spot after a ride, when it's warm. :dread:
handling will become weird and unpredictable--possibly dangerous--because of the drastic mismatch between front wheel/tire and rear, a bad choice...
heaT on the boots will help. be sure to loosen clamps on both ends of boots. rock and roll is another key to removal, after you stRT pulling on...
jeezus ! percentage-wise that plastic guard blocks about 30-40% of the radiator area, and that can't be good for cooling !!
NOT BAD as pumps always click when they're actively pumping but should stop when carbs are full. I don't think it's good for any bike to sit...
do you feel resistance when you squeeze the clutch lever ?
looks like one of the seat-retaining hooks has gone MIA.
with the idle screw backed out, all butterflies should be closed 100%. or maybe u cracked/damaged a boot while mounting carbs
a good first step to encourage peace in the mideast would be to force israel to accept the 2-state solution and stop building settlements on land...
our Terry scores another touchdown, goal, basket, hole-in-one !! good work, matey !! :loyal:
Them tear-a-wrists are just "losers" according to our idiot prez, who couldn't come up with anything better. :eek-new:
sorry but i can't agree. i would have been seriously injured if i hadn't been in gear (with clutch pulled) at a stoplight when an inattentive...
Separate names with a comma.
