not familiar enough with that model, but there may be cylinder block drain plugs on the rear. if so, they'll be hard to reach but necessary to...
If you're interested, i'm offering to professionally inspect, clean, adjust and leak-test your 500 carbs for just $220. I also have some spare,...
seems like you need to clean the carbs again, but better. :Bolt:
so unbolt the centerstand and keep it ready at home for quick (on some bikes) deployment as needed. safer than grounding out. only 2 ez bolts on...
remember that the last few feet near a stop sign or light is the SLIPPERIEST, so do the hardest braking earlier on the road ! it's a bad idea to...
anytime the fuel pump is questionable do the pump relay bypass as described in the FSM, basically a jumper wire that sends power to the pump...
similar but not the same
fresh fuel present in sufficient quantity ? :Yo::Cry::Bolt::Fencing:
like the brakes on a ducati, r-6, or most 3-pot caliper setups on larger discs or like the triumph triple i rode at a demo day. alot of riders...
An unexpected event resulted in my adding an '87 700 (in white) that a neighbor brought in and asked if i wanted to have it. Original engine...
Unless you've ridden a new, modern bike you may have no experience with really excellent brakes.
I have a Kerker 4into1 on one of my '86 700s, and i still haven't tuned out the small flat spot between 4500-5000 rpms, a characteristic of 4-1 on...
a proper compression test is made with the throttle held WIDE OPEN !
OEM-quality chains last about 20,000 miles.
If Honda didn't make larger diameter bearings to go with an undercut crank, machining won't help. Best suggestion is to find a newer bike !
Check for sparks first, then open each float bowl drain screw enough to verify there's gas inside. New plugs usually help. are you using choke...
Thanks, Terry. that's what i need.
got one here and don't know, help please.
wha, no fsm ? you're gonna need it along with detailed instructions for tuning on K&N/Dynojet carb kits. probably best not to vary from the...
Top up the cooling system under the rad cap when engine is cool, not just the res bottle. Be sure the cap is twisted to fully seal and against...
Separate names with a comma.
