you might get away cheaply by buying a simple $10 thread rethreading/ cleaning tool without much debris getting in. rear plugs are ez access,...
neither chemical cleaners nor compressed air are sufficient to clean a slow jet properly. in addition to those, a .010" steel wire should be...
i have it on good authority that the English translation of Shindengen is "You walkin' home, sucka !"
best to suck dry he overflow bottle. don't assume that you're fully filled until you recheck (cold) under rad cap after the first ride.
remove airbox top and filter so you can see whether the vacuum slides move in response to throttle with engine running. all should be the same.
you're too kind, randy, but captain 80's knows alot more than i.
front cover is EZ........after you remove the radiator.
you're probably seeing the cross-drilled holes that drain the sparkplug wells. gasket must be leaking :eek:
WELCOME ! lucky you living in beautiful Milan, home of Alfa Romeo :mech:
good ole JBWeld will fixer up ! try it. :chicken: repairs i made years ago are still holding strong, no leaks.
plenty of ventilation is needed as fumes are really BAD ! :squid:
cars just aren't that exciting................:Bored:
[MEDIA]
HAPPY holidaze and new year from my gang to yours !! :Yo: [ATTACH]
you'll also need to clean the rotor and caliper of any oil and replace the brake pads if they've been soaked.
DRUNK SQUIRREL: [MEDIA]
no winging, lad ! 'ave a look at me back yard 'ere ! [ATTACH]
the rod had probably sustained earlier damage from a tip-over and cracked, seems it was already bent. there's no way that normal forces from...
after warming up the engine, first thing i'd suggest is a compression check.
i don't have much ca$h to sink into the project, but i've accepted the challenge of getting it sorted and RUNNING ! :wheelie:
Separate names with a comma.
