seems like a bypass wire is on the pump relay already ?? good luck with your cheapshit chinese garbage pump, and be ready when it fails soon.
not a good idea to overheat an engine by prolonged idling ESPECIALLY in warm weather. cooling depends upon air moving through the raDIAtor (with...
if you're lucky sometimes the seal can be turned back-to-front and work again.
if you heaR THE PUMP TICKING alot WHEN YOU TURN ON THE KEY IT Suggests that the pump relay has ALREADY been hotwired. (blue to blue/black)
it' fine your only mistake was brexit. :Yo:
yes, missing bolt that supports fender and brake line holder.
only one screw on my bikes.......?
it's easy enough to find bulbs that have the low wattage filaments broken, so use those to pass inspection.
no problem finding head bearings
check battery voltage first.
stupid regulation, just ignore it. safety first !
do not disable the running lights ! :cool:
spinning the engine over with plugs removed will also prelube everything.
it's best to check coolant level under the rad cap, not the overflow tank.
vin should be stamped on steering head tube right side.
another pump test: use ohmmeter to check for the resistance between it's two leads. a good pump will show some resistance (continuity), and a...
i can't tell what went wrong but guess that possibly a mistimed cam lobe was pushing on a valve that was in contact with a piston, in which case...
curious .....did you rotate the crank (even a little) while you had the cam out ?? ALWAYS rotate the crank over at least 4 revolutions by hand...
sad story :( you must have had some warning that things weren't going back together correctly when too much torque was needed on the socket...
it's important to clean discs really well when installing new pads, especially if the new pads are a different brand. brake clean spray,...
Separate names with a comma.
