in southern arizona overheating is common; in slow traffic it's normal. [ATTACH]
in addition to capt 80's reply above, replace the main fuel filter, and if you're up for a carb r/r :mad:, get in and clean the small filters...
when synch is good your bike can idle smoothly down to about 800 rpm.
drill bits are the least accurate way to synch, not recommended.
haha, 84 degrees and a record for the date, sunny.
remember, the SEQUENCE of working on the screws is all-important.
it ain't over till clearances are set and cams properly installed and timed.
you may have developed grooves on the fingers of your clutch basket that are responsible for jerky action and don't need plate replacement, but...
on buffalo cl: https://buffalo.craigslist.org/mcy/d/lancaster-honda-vfr-1200f/7303787245.html
once the bench synch is done and gauges are set up, don't turn any screw more than about 1/16 of a turn or things could go bad quickly.
maybe if you loosen one of the cables down at the holder bracket ?
airbox i guess.
sure but you might slide off to the west any time. :oops: nice and 70 degrees this week, been riding for a month already but my main bike has a...
match the vacuum on the front 2 cylinders, then match the 2 rears together, then work on the f/r linkage screw to balance fronts to rears. there...
the sequence is very important. start with carb that the idle adjustment screw controls. if the carbs are mounted you will need a proper set of...
the middle east or the Permian basin most likely.
77 , is that old ? [ATTACH]
:Nod: you should be working for NASA or Spacex :Smile:
sad situation :( sometimes dropped items can cause damage if the engine turns over and may not show up in the pan. suggest you get a socket on...
to get pressure in the clutch mc........try removing the slave cylinder and use a C-clamp to hold the piston fully retracted. you may need to...
Separate names with a comma.
