I see an exhaust on the 500 Interceptor that should be extracted.
I would find it weird if a shop DID do that. Of course I would replace seals when they are out on a 30 year old machine. They may swell back up...
Sounds like your starter button is sticking just enough to cut the headlight but not engage the starter. Try physically pulling the start button...
Good choice. Hard wire your rectifier, install a parallel switch for the fuel cut and fan and ride the piss out of it.
Wow, a 30 foot ride. Time for a beer stop to celebrate. I know you mean minutes, but couldn't resist.
On a fairly empty tank you could lean it way to the right and just replace. Once the selector is removed it's just 2 8mm head bolts. You might...
And looking at the wheel closer, seems someone went above and beyond machining the locating tabs on every disc mount. Not necessary, but good...
What problems (besides the current spacer issue) have you been having with the setup?
So the spacer with the metal inner, that goes over the speedo drive and reduces it to 17mm? Then the extra spacer (assuming it's 17mm) makes up...
What front end is on the bike? Cuz the mod for the front is to machine down the wheel where the rotors mount about 5 mm each side to fit the...
Could be a good start if someone is dead set on a 500. https://seattle.craigslist.org/est/mpo/6213414547.html
Something funny here. There are not 2 spacers originally in a front wheel. And that dust seal with the metal inner is strange. That bearing OD...
Telefix is the brand. They were out of germany. Pricing is hard because shipping is going to be fairly spendy. I got one recently in what...
Nice 500 and a nice collection. Sweet. Weird the rear signals are wrong, everything else is pretty original. And watch the brackets slide in...
Depending on where and how it hits the exhaust, perhaps you can get another used main stand and have it modified and welded to miss the exhaust...
If you can find one that will work on it. And know how to work on it. Just send the carbs to Squirrel.
Not that I've seen. I look for different shit a lot, but maybe there's a sourace I haven't come across. Pretty much any other rad is going to...
No prob. And just to be clear on something... that pic was off of the internet. #filthy #notCaptain80s
[IMG] I just told you... the spigot on the intake. See that philips screw in the intake of the head? One of the 4 locations (one for each...
Um... It needs to be connected to something that is creating a vacuum. One of the carb inlets on the head should have a spigot instead of a...
Separate names with a comma.
