Your clutch plates are likely just stuck together from sitting. Pretty common. Couple ways to try and un-stick them without dis-assembly. Get...
Yes, Fuel mixture screws / pilot screws... same thing. Fuel screw > spring > washer > oring. You accounted for all of them when you had the...
When you remove the pilot screws for carb cleaning, each one has a spring, washer and o-ring. If you do not know what I am referring to, then a...
On my 86 700 with a 4 into 1, I went with 125 mains, 42 pilots and the stock needles shimmed up using the same washers as the pilot screws have in...
The master cylinder issue he is most likely talking about is not necessarily unique to the bike or master cylinder. There is a tiny hole in the...
Your jetting might be on the lean side considering you have a 4-1 slip on exhaust. And you should not get any pressure release when opening the...
On the 49 state bikes (which is what yours looks like due to the open carb vents), the tank bents through the gas cap. They can get clogged and...
That is just a vent hose, not vacuum. Sounds like you need to do a more thorough carb clean and make sure all passages are clear. Your idle...
4-1 not my first choice on these V4s, but I couldn't believe it was a buy it now.
CR500s can smell fear. They will take your ankle out and drive your knee into the the throttle tube.
Didn't have the money, but I had to. Very rare. Even if the headers are smashed half flat on bottom, still a great deal. Time to start modding...
86 - 87 shocks are very short. Your options for modifying and swapping another shock are very limited.
You are describing the 83-85 shock. The 86 shock just has hydraulic preload adjustment. No air or dampening adjustments.
That was a really good "buy it now" price, especially with shipping.
http://seattle.craigslist.org/tac/mcy/5769313623.html
You would have to try and fit a VF750 upper cowl stay to the 1000F. The way the 1000F cowl fits is VERY unique to that bike. Anything is...
http://www.ebay.com/itm/BB-15-11636-ML7-000-Originale-HONDA-gaskets-VFR-700-750-F-/281888990272?hash=item41a1e4a440:g:Gx0AAOSwZ1lWdAej Pretty...
I thought the VF1000R motor would fit, you just couldn't get the rear valve cover off in the frame. But if this is really an 84 1000R motor, they...
Thanks man. Regarding the 1000R, it is probably due for a general carb clean then a bench synch with those miles if it has never been done. In...
That is a Telefix aftermarket lower.
Separate names with a comma.
