Saweet!
I haven't drilled out the rivets on a Corbin, I'd imagine you'll find the bits after you remove the cover. If you're going to do 2" then I'd just...
RPM is provided by your right wrist, TPS tells the ECU where it is that produced that RPM.
You're truly sick....... congrats. You know the '01 is the better one, LOL.
The trick to your play is dim's C and D... all others not that important to be exact.
They are called well-nuts..... rubber with a shoulder and a threaded brass insert...... standard bike part, may even be available at your local...
Closest thing I got is a standard plastic push pin fastener for fairings, the ones where you push in the pin to release it... fits in 6mm holes....
Yes, I'd be all over that.
With any seat, the shape and width that supports you is the key. Padding is extra.... I scored a Russell for my Gen5, it's pretty comfortable,...
WD40 is mostly naptha and a wee bit of oil... better lube is AC50, and if you find dirt accumulating, use something else (drier) that doesn't...
Very nice!!
Throttle position info is a necessary component for ignition timing. If the ECU doesn't know where the throttle is, how would it know when and...
The Motion Pro Jumbo caught my eye........ https://www.motionpro.com/product/08-0135
I bought a cheap tool a couple of years ago, changed two chains and rivetted them just fine, however, that tool might be able to do one more.......
Wiring diagram says Fuse A is at the starter relay, and Fuse B is the other main fuse to the left of it in a separate holder, red/white wire goes...
I gave a hurried reply the first time, I had to go to a job.... The ECU controls the time-out and activates the fuel cut relay, so electrically,...
On your list of things to do, upgrade the RR to the good mofsets and its wiring scheme, no need for VFRness at all, and the load is lightened on...
Not sure the stopping of the fuel pump is related to pressure, but rather a time-out ..... fuel cut relay. You could test you are getting fuel...
You are powering the R/R directly from the battery with the Roadster cycle eliminating the need for the bike's wiring for that. You then locate...
Would suggest checking the starter relay connection/connector, and stator connections for any overheating, and of course the battery cables to...
Separate names with a comma.
