Gear driven cam noise (whine) is on right side. Just had all the plastic off my bike for the last month sprucing everything up.. if something is...
yes check that R/R... I had a signifcance in mine when probing between the 12V + and -. Regulator was warm to the touch, always on... should be...
I make a habit of changing brake and clutch fluid every year, keeps things clean and it is preventative maintenance, doesn't take long if you do...
I don't like the black bits... if you check the three yellow wires to each other for uniform resistance, and each to known good ground to see...
If you have aftermarket springs (usually slightly gauge spring wire), typical oil levels are lower, more like 130mm. Your wee bit low is nothing...
Suggestion..... pull the lever to the bar and zip tie it there, leave it overnight... air will rise to the top. In your case with little/no...
It depends how bad they are..... got a couple of pics?
1/8" or 3mm ID silicone tubing stays on bleeder nipples.. SpeedBleeder sells it as well.
Perhaps refresh the connection to the fuel sender, unplug and replug, to eliminate that as a cause of resistance as well.
Mostly surface rust from having no lube on the link faces and put away wet. Inspect every roller for similar condition. Chain may have been...
I'll just say the FJR had a 600 watt stator and the mofset will handle high outputs or manage "regulation" better than the OEM type which get...
It's always worth re-checking the wheel balance at both ends with this kind of thing. If tires aren't new, they can cause issues if half worn....
It would be interesting to know their longevity, can't trust they are mofsets... an R/R doesn't usually fail suddenly, mostly by overheating at...
I think some manufacturers say 6 years now, but yes, keep them out of the sun and if you see any cracking best replace... but I know guys that...
When's the open house? It'll take me a few hours to get up there........
I stared at mine, waiting for a fuel tank gasket.
Don't get me started, Randy! Make a collision damage claim and you will pay back the repair over next 5 years. $5000 insurance estimate repair,...
Liking the gauges, very nice indeedy!
I did V35 on my last bike, a tad older style, but can get coloured top panels, or just paint the existing top panel (Suzuki version did not have a...
Separate names with a comma.
