Where are you located?
Gents have you tried Novus #2 on scuffed plastics (or paint). Superfine abrasive in it that smooths them out. Put some on a microfiber cloth and...
Have you checked the chassis ground and the orange ground spider? Poor grounds can be an issue. A prevention clean might be in order anyway.
Check the chassis ground on the right side of the frame and the infamous orange ground spider left side, taped into the main harness near the R/R.
I'd have an X in a heartbeat if they sold it here.... sigh.
[ATTACH]
If all above is OK and it still happens, I'd unplug the TFI, reconnect stock, and see if it's an issue then. I'd also verify the chassis ground...
I've got the VFR set aside, as I'm working on 2 other bike projects..... no clearance issues on the sides because it isn't any wider than stock......
Just put one on mine, not ridden yet, not even scrubbed in.....
Have you checked all the ground wire points, I'd start there and make sure everything is clean and tight.
I don't think that's a bad deal considering what "undamaged" ones are going for..... chicks dig scars if you want to leave it and just ride it. A...
These aren't cheap options, but give you the rearward placement you need. Helibars claim 1.25" up and 1.5" rearward, keeping stock cables/lines....
Make yourself a squeegie from a plastic body filler applicator and wrap one edge with wide female velcro (the soft side).
Perhaps to help you along with your decision.......... [ATTACH] I used Superbright LED's in mine, green for backlighting, amber for turn...
Randy's been working on his May Two-Four a bit early methinks.......... what shape will you be in next Tuesday, bro?
Look on lower cowl diagram.... I think the stay should have a wire bracket on it, item 5?????? Acts as a clip for the white part of the adjuster.
One tooth off shouldn't destroy valves, and it wouldn't run that smooth. Get your cam timing corrected and try again.....
Agree, address the ground block and the main ground on the frame. Check connections to the items, including vacuum hoses. Clear the codes, start...
Very nice..... the yellow ones are the fastest!!
I would check a few things...... assuming caliper pistons are clean and not sticking Clips at forward end of pads are in good shape so pads have...
Separate names with a comma.
