Not the best shot. Way better in natural light. I wasn't very good about documenting builds (before phones with cameras and forums to post on),...
Can't wait to see. I restored 2 CB-1s at the same time about 15 years ago. One as a side job and one for my wife. Both in 4th gen red. On the...
I like pulling shades out of the decals for color contrast. The grey out of the Honda wing on the tank would look great on the wheels, but maybe...
Well... I "get" to separate the carbs and replace the fuel tube o-rings. At least I just did this on my 1986 VFR750 this last summer, so the...
I wore my Schwantz the first time taking Freddie Spencer's riding school. Both Freddie and Nick Ienatsch gave me some shit. It was funny. The...
Arai RX7 Corsair, Colin Edwards Valencia Replica. Initially released, 2005, 2006? [ATTACH][ATTACH]
I'll look into that fuse box, thanks. Trying to work with what I have at the moment, and this tucks inside the fairing pretty good and still...
Rear inner fender, wire harness and ignition system installed. Radiator and oil cooler cleaned, fins straightened, light coat of paint and...
My very first helmet from my parents at 9 was an Arai (far right). My 16th birthday present was a Freddie Spencer Supervent ( upper left) and...
Wow, they've out-LAMED their previous level of LAME. What types of bikes they do they normally work on? There are very few people that are the...
More than likely it should fix your issue. You may have to adjust the short shift arm on the spline after changing everything a little to get it...
It is not. Rod should be straight. I have seen this a lot on the 500s, a little bend gets worse and worse (when people start jamming on the...
I've seen the inner duct color matched, and it looked pretty damn good. Still obviously a duct, just more subdued.
I personally would loosen the lower triple clamp bolts and fender bolts (brace to forks) and make sure that the front end isn't "bound" or twisted...
Nice pics! What is the reasoning behind the rule regarding fairing lowers? The fairing mid sections will make it look a lot better. And looks...
Same boat here. Getting closer, almost ready to start it. Haven't even updated my build thread yet. 86 700. [ATTACH][ATTACH]
You have to replace all 4 of the intake boots before "diagnosing" anything else. Those are a real problem right now regardless of how much...
Sounds like you still have some dirty/plugged circuits in the carbs to me. Also, did you have to "adjust" the floats much. I rarely come across...
Bump to see if anyone has a 1000R rear caliper bracket handy they can measure the width of...
There is a idle drop procedure, but I run most of mine around 2 1/4. But it also depends if I have stock pilots or 1 size up like I usually...
Separate names with a comma.
