I so want a VF100. The pistons are tiny!!! Most people won't pay the price for a V4 100cc. Hah! I know what you meant. eBay ... Prepare...
Finally finished the brakes. [IMG] Anxious for a test ride. Should be quite a bit nicer than the F2 calipers with their tiny brake pads....
Yeah, I wasn't talking about clearance. It's putting that size tire on that rim. The profile of the tire is messed up. I agree with Squirrel,...
You have a 160 on a stock VFR wheel?
Stock wheels are not wide enough to fit radials, and hence, prob won't find radials in the correct sizes. Bias ply it is.
How many miles?
Prob want to take your right crankcase cover off and inspect the starter clutch housing (that has the one-way rollers in it). The housings have...
Thanks everybody! This thing may be the biggest people magnet out of all of my bikes and is a blast to ride. It was a beautiful afternoon and...
Not a VFR, but I wanted to show her off. Posting here because this is where I spend most of my time. 1965 CA200. Honda "Touring" 90. Push...
Another issue I always had when they came out is that they put the black frame and wheels on the R/W/B and put the silver frame and wheels on the...
That is a Targa lower, not Spec II.
Mileage on these engines is almost a moot point. If it sounds good, runs strong, and doesn't smoke... Enjoy your 750 motor. I have personally...
The early gear driven cam engines have more mechanical noise than the later ones in my opinion, covering up some gear whine. The later ones...
It appears that would be the case.
They sold both 700 and 750 in 86. The 700 was made to beat the high tariff on motorcycles over 700CC. A 750 will say "VFR750F" on the tag....
You just verified it's not.
That's the sensor, yes. All U.S. 86 had "gold" covers. Somebody has installed 87 covers or they have been re-finished. How many cc's is the...
86 motors have a timing sensor with a wire on the back of the front cylinder. Then you can look at the casting marks on the cylinder portion of...
Good news.
I've done a swingarm. It is clear anodizing, and it is a bitch. You have to sand thru it then polish it back up.
Separate names with a comma.
