Holy mud. Do yourself a favor and incorporate some suspension upgrades when you build the second one. The suspension design that works pretty...
Or it's just old and weak and no longer is rated at the pressure it was when new. Get a cap, you need one anyway. Fill the overflow tank to the...
"-Once the engine heats up, coolant comes OUT of the reserve tank hose and fills up the reserve tank." Please clarify this statement. Doesn't...
The overflow tank level should be inspected at normal operating temps and be between the "low" and "high" marks per the owner's manual. If you...
Anything unleaded 87 and above will be fine on that bike. And I asked earlier but you may have missed it. Your VIN does start with JH2, right?...
Very cool. Looks like Honda might have done a Rothmans 500. Good job.
artee, what is the spread on the 88/89 triples? Same as 86/87 or wider like VF1000/CBR-F2? Pretty sure it is wider, but want to confirm.
There's a loop on the end. You have to move it down and out of the it's holder then you can pull it out. #5 right? [IMG]
"Yokes", not "Triples" That was my problem. I'm a stupid American.
My quick search on ebay (US & UK) didn't turn up any for sale.
That bike uses the same size front rotors as the 91-94 CBR600F2. You could find some good used rotors and get a slightly updated look for a...
I didn't notice the first time, but you said USA built? Your VIN starts with 1HF? (I think that's correct for U.S. built) And YSS shocks can be...
I don't think its the tensioners then. More than likely valve adjust, especially if it was your first V4. The tools really aren't that special...
Does the rattle get louder when the engine is decelerating after revving it? If yes, then more than likely the cam chain tensioners. And they...
I dont know if it's been done and is not a problem, but the more gull-wing style lower triple clamp might create interference issues? You could...
Yeah I thought it was clear, but after thinking about it, that's when I added some diagrams. The VF1000F shares the same part number. Those are...
Nope! As stated in the original post, it's the spacer INSIDE THE WHEEL between the bearings. I would guess when the wheel was sandblasted (there...
There's enough of these bikes out there and enough people that have done wheel swaps, I'm sure one will pop up, especially out of a bent or...
Hey all, I bought a 1988/89 VFR750F rear wheel, but it was assembled after getting painted at some point in it's life missing the inner rear...
None of my bikes route the carb vent tube back into the plenum. Except for CA bikes, they just vent to the atmosphere. VF750F just takes a turn...
Separate names with a comma.
