Probably is what it will take if you have already been soaking with PB Blaster for the last month and then tried applying heat with a torch before...
Everybody thinks they can nail V4 carbs. They are weird. Squirrel is not being cute when he says 2nd and 3rd attempts without success. It's...
Well it was easy to confirm that's not it. I am leaning towards the carbs needing some general love, but will be surprised if it is actually the...
I hate you Europe and your 400s. Dammit! Stupid Americans with our small penises.
Filters will not necessarily fill up. That doesn't prove your relay is good. Like I said, I've seen them partially work. And with the relay...
Yes, that's it. Paperclip or some heavy gage wire and some tape can work. If you don't get it right you won't go far anyway. With the key on,...
Normal.
The relay is what allows the pump to operate. They are widely known to be a weak link. Usually they fail completely, but I have seen them fail...
And the upper mark on the tank is when up to normal operating temp. If you are filling it to max when cold, it will be too full when the rad...
Just for giggles, jump the fuel pump relay to eliminate it.
Did you verify the condition of the air filter? And also make sure the air box isn't full of dog food or nuts from a rodent? The fact that it...
If you don't have one... then I would agree. "Flanged side (which is actually the nut), goes on right side with spacer." This shouldn't be...
I had to blend the shit out of the right case, and I'm sure it's thin. But it's symmetrical and damage "free". Think my damage was more on the...
Wander a few paces left or right in the Auto Parts store and look at some of the Dupli-Color made to match some factory automotive finishes. You...
A lot of the universal silvers tend to look a little "cheap" for me, but can have their place.
Nice front end. Details please. 900RR? CB1000 The Big One?
I just looked at my 84 VF750F. Your axle is backwards. Flanged side (which is actually the nut), goes on right side with spacer. Axle end on...
All 86 fork lowers are black. Pictures are needed at this point. (Actually they are always required). :-)
99% sure your axle is in backwards. The side that can take the 22mm wrench (with the lip) should be on the right. I can verify when I get home.
What bike by the way?
Separate names with a comma.
