Very similar approach to Pete. For me on coolant hoses, I generally inspect for issues and replace as needed, during maintenance and on...
Yes it "seems" high for a used wheel, but unfortunately he's not far off. Why don't you compare it to all of the other ones for sale. Oh wait...
Welcome!
[IMG]
Nice. My riding days are limited now. Gonna drop into the lower 40's (F) after these couple storms move thru. :( I can always bundle up, I do...
Those o-rings are likely re-usable. I would save my money. Before removing the forks from the bike, remove the circlip under the dust seal and...
ATF would be fine (Approx 7.5) if you already bought it. NO AIR! The proper oil height will take care of that (by reducing the air space). In...
Yeah, that came out nice. Good job. If I was in the same boat, I would still disable and use their recommended oil height with a 10wt oil....
With the correct components, it is not needed. And just not good. A valve that restricts the flow of fluid to try and keep the forks from diving...
I think you'll be fine with a one piece. Strongly consider disabling TRAC with the correct springs and fork oil height/weight though.
IN A PINCH, remove as much as possible on the clutch side exposing the crank and clutch gears. Tie a shop rag in a knot and let it bind the gears...
Naked for now. Would love to put some NC30 items on, but not now ($$$). I'm already spending money I don't have on this bike. But the front end...
It's a project. $600. Runs perfect. Bunch of new parts: Chain/sprockets, cables, air filter, tires. [ATTACH] But its a solid foundation to...
We had a beautiful weekend here in the Seattle area, almost 60F. Went for a nice ride on the ST after picking up some of the last pieces for the...
If you're doing paint, black for sure. High heat silver looks cheap to me. Those were nickel plated originally. I painted the RC26 stainless...
I followed Freddie at speed on his VFR reach over with his left hand to maintain throttle while he used his right to reach down and point at the...
Separate names with a comma.