One other thing too.... if you ever wanted to revert to the 18" wheel or play around with different heights, you can install the 87 suspension...
They are. While cool, I'm not interested in that type of stand. Just looking for a simple, small, well built rear stand.
OK... just measured a 86 and 87 stock shock. Eye to Eye mm 86 - 270 87 - 280 And as I suspected the application guide lists 86 and 87 together...
The swingarm and linkage bearings have such a limited range of movement, they are rarely "bad" unless the bike has been used as an anchor in the...
Looking for a stand for my 1990 & 1995 VFR and 1988 Hawk GT. I've found I need the ability to get the rears off the ground more than one at a...
For the money you would be putting into a "rebuild"... I think you know the answer.
I recommend going thru the application guide and make sure the specs (specifically the length range) matches your needs. I've seen a couple...
The 1000F had a DMr modded CBR unit and it worked really good. But I needed (wanted) more ride height after the switch to wide 17"s front and...
[IMG] Preload, separate ride height adjustment and rebound damping adjustment. Not saying it's the best shock in the world, but for money, it...
YSS. Have them in 3 bikes now and I like them a lot. Very good value. My first one was on a bike (VF1000F) that I didn't want to have a...
Find a project bike with good bones so you can put suspension and wide wheels on it. It's a completely different bike in the good way. Still...
Jesus Christ! You both came out like bandits!
Your GOOF2 is really sweet. Def feel good about that purchase, hard to find not THRASHED anymore. Having worked at the dealer when they came...
On the lift she goes. [ATTACH] Priority number one is get the carbs back in and run it to confirm the engine. I am very confident judging by...
Body work removed for some work, all wrapped and tucked up in the shop attic. [ATTACH] Tapered steering stem bearings (just cuz). 11K on bike...
The state of the world is insanity. This is $2000 dollar bike not too long ago. They have gone up and down A LOT in the almost 30 years I've...
Getting closer, but there's some issues here that don't immediately jump out... something's up with this bike. That upper cowl Blue does not...
I would put a LITTLE some thing on there ( red rubber grease, silicone grease?) So the first couple turns when dry won't gall the rubber.
If it was such a good job and not a color like Lime Green, I think I would have just started over with a different set of wheels and then sold...
OK good. I thought, "no way". But then again... maybe? Didn't bother me enough to go look. Cool.
Separate names with a comma.
