Re the above: pump is 3 psi. All my bikes run with the pump relay eliminated and a jumper wire across its plug. Much easier starting and less...
OK, so put me on "Ignore" like so many others have.
As a beginning knee-dragger i quickly learned that once you're over that far you must maintain a constant radius (one turn=one lean angle) and...
Thanks, Dave, that's seriously brilliant info-data for our site !
Havent tried it cuz i'm too busy tracking UFOs. :crazy:
Color me "worried" as i did a recent deal....... :distress:
Given your shop's recommendations and my own ( i worked as a perfessional motorcycle service manager for a week before i was canned !) leave the...
Geeze, i'm not brave enough for that !
Bypassing the fuel pump relay with a jumper is a good test for the pump electrics. So is a resistance test between the 2 pump wires. If pump...
Don't buy any no-name or cheap chain or you'll regret it. :mad-new: Using an OEM front sprocket will reduce noise and vibration.
idling a bike for more than about ten minutes is a bad idea. You need to pull the red plug off the top of the starter relay and check wires for...
Any online place that sells Honda parts......or your local Honda mc dealer. The same exact identical switch (i believe) was used over several...
You're makin good progress. You need to watch the Hurricane for chain-tensioner problems.
The melted plug probably killed the stator, cuz if any 2 yellow wires touch while engine is running, it burns the stator.
It's at the extreme rear right side of engine, a few inches in front of and below the rear brake pedal, with a single wire going to it....
Their shipping charges are truly exorbitant. I tried to talk them into sending me 4 float bowl gaskets in a simple envelope cheaply, but they were...
Even if it doesn't hurt the engine (burned exhaust valves?) it will destroy your hearing and create a poor impression of Honda motorcycles and...
In this case i think it's clear that the cam snapped when the chain tensioner went bad, causing the cam to jump timing and a rising piston hit a...
:shame: Thanks, Captain !! I'll do more research before posting in future. :homer:
It's not burned out bulbs or a bad fuse cuz you already checked them, right ?? So the fault most likely resides within the START pushbutton switch...
Separate names with a comma.
