Here's the best I can do, and realize this is what I chose to do and I have had ZERO issues over many miles: New sprocket hub outer spacer is 7mm...
76 x 2 mm Float Bowl o-rings 99% of the time when I get into carbs, the fuel cross-overs and float bowls are really the only things that are...
Remove EVERYTHING. Each carb has a vent spigot that needs to be capped/plugged. I found it is easiest to re-use some of the small vacuum hose you...
Fired instantly (after putting ground bolt in for wire harness). [ATTACH] Burned off some smoke and the fan cycled a bunch of times. [ATTACH]...
There shouldn't be that much difference. Are your levers still OEM or aftermarket?
Fuel tube: 7 x 2 mm I can update later with the float bowl o-ring.
The job is not "hard", it's tedious. A good work space you can lay everything out in the "exploded view", without risk of being disturbed.
I sell you a stock shock.
Yeah.... don't bother trying to rebuild. They are not easy nor worth it. Is this bike for sure a flip?
ASSUMING THE CARBS ARE CLEAN AND PROPERLY ASSEMBLED, pulse generators would be my next step. Unfortunately, it will be confirmed by part...
On the way to breakfast this morning and my neighbor hands me a rear brake caliper he found for his custom '68 Triumph. He thought it was a good...
bmart always has some good insight on suspension and sees/ experiences what proper suspension can do for you. If you're coming from years of...
Cool. Is that a stencil used on the winker housing? Think Ive seen you do that on some other stuff. You really want that site glass to come...
The 90 - 97 included angle is more open, with the fronts all the way in, the rear is already nearly in the boot. Unlike the previous Gen.
The red and green wires that normally go into the harness, get routed to the battery leads with a 30A fuse on the positive wire. It's what the...
Also, keep in mind mounting will likely not be "bolt on". You might have to create a new hole or two on the subframe plate, as I'm sure you're...
Don't just crimp the new unit in! The 3 stator wires should be soldered. Crimped connections will build excessive heat and likely fail. At...
That one absolutely will work. I would recommend getting a kit that goes straight to the battery, but not absolutely necessary.
Just so if anybody is in that area and wants to hook up with a known good unit to confirm. I know money is tight for a lot of people right now,...
Where do you live?
Separate names with a comma.
