My guess is the plates are expanding enough to take up when hot which indicates you probably need new clutch plates
Going by the problems these have with charging I think they should all be fitted with a volt meter
The pumps I have looked at on ebay are Chinese (what isn't these days) I just go to ebay and put in VFR fuel pumps and it should come up The ones...
You can get a new pump for about $50 on ebay and from what I have worked out these need a full tank of fuel if you run without a pump because the...
Ok so it is freezing cold here at the moment so I scrolled through 3879 VFR 750 items on ebay and not one thermostat, just thought I should...
I like it when I go into the local Harley showroom, I have a bad limp, I wear my oldest work clothes, I wear odd boots because of my bad leg and...
Coils spring to mind as a possible
Even made the news out here as well
Yesterday a mate and his son turned up on a pair of new Indians from the dealership for a days test riding around the hills. Monster machines and...
I saw a review he did on the CB900F a while ago , just as silly
The rings and bores usually rust up so fast that they seal the water from getting down into the crank
Out here if you buy a new Harley, first thing they do is introduce you to their " Chrome Consultant" and that is on their business card
Steam off the exhausts was knocking out the coils on my CB750, hose the coils with water no problem, but the first bit of steam and bingo motor...
Good call I would say but more like pinching the line when the tank is lowered into position and lifting it frees the pinched hose or the hose is...
It sounds like the pump is running dry and when you lift the tank gravity takes over to prime the pump, apart from that no idea but it is...
Somebody replied to this in an email to me but somehow the email has vanished, I just wanted to thank him for the advice
Just because you have gravity bled it you still have to pump it to bleed completely pull the lever in once, hold it, open the bleeder, close the...
The reason for using a syringe on the bleeder is because it will push the air bubbles up easier than trying to push them down and as you say there...
Thanks Rotary I fitted one of the square ones , inlet one side, outlet the other, not sure what pressure it pumps but it runs all the time and I'm...
I know it has probably been done to death but I'm looking for a new fuel pump for my 86 VFR. Would I be right in assuming that pretty much any of...
Separate names with a comma.
