I can see the reason why they fit the relay because if the engine stops and the ignition is still on then without the relay the pump will keep...
Remember go over a bump, swing arm comes up and tightens the chain, it can give a snappy feel
Billy, you want to see some of the dumb shit we see on ebay in Aus regards postage from the States $1.50 item with $30 postage, don't know why...
I'm having a similar problem since I fitted an aftermarket Fawcet style pump which requires a filter fitted before the pump and as room in there...
From what I have read the fact that the pump only fires on the 2/4 coil it is switching on and off constantly and this is what burns the points...
Today I moved my rec/reg out onto the footpeg frame so it is now going to get some air flow over it, glad I did because then I noticed the plug...
Thanks Ed, I had a look at the Honda pump but it doesn't mention if it requires a return to tank line, I'm guessing it does. Would be good if...
Hi Wayne I have been doing a bit of reading up on these pumps, I fitted a Facet style pump and it is noisy, but big deal, at least you know it is...
Thanks a lot Wayne I thought this must be the case, now to try and find a little pressure switch
I have phillips head, anti tamper, straight blade, impact, right angle but I can't recall any chit ones unless you are talking about half the ones...
Mick is fine last time I heard :playful:
Ok so can anybody tell me if the OEM pump on these ran constantly once the ignition is turned on or did they have a pressure switch fitted internally?
I guess that any cooling has to help and can't hurt but I'm still using my Pentium 4 :smile-new:
Simple way to test the starter solonoid ,just make sure it is in neutral or on the center stand and put a screwdriver across the 2 terminals on...
Nic, you have proven that you have power to the switch so now you have to test power out of the switch. Nothing to do with the clutch, that would...
Nic you have to go back to the ignition switch and see if you have power to it, then see if you have power coming out of it Same with the kill...
The fact it wouldn't fire with a push start to me indicates a bigger problem. Kill switch ? many people get caught with these on many bikes
Nic, I'm not sure if powering straight into the coils will put power to the CDI unit, it might it might not. I would put the 2 wires back into the...
You will never get spark from any coil if you have no 12 volt power to it, no point in jumping all over the place. Run a temp wire to one of the...
I fired my 86 up yesyterday after about 18 months and I had the seat off and I was very surprised with how hot the rec/reg was with about 5 mins...
Separate names with a comma.
