Agree with Jeremyr62, pull the carbs and learn how to clean them. There is no way to deal with your problems without tanking them apart. also...
Hindle 4-1 exhaust is cleaned up, re-painted the headers, re finished the end can, and installed it on the bike today. Carbs are being installed...
Needle & Seat or float issue. if the carbs are out its very simple to remove the float bowls and at a minimum clean the jets and change the...
thanks for all the replies guys !! very helpful Problem is now sorted - swapped out the left calliper again, all good !!
swapped the left calliper again (3rd different one) and different bleed screw and Im starting to get some pressure now.
Yes, the master is good, rock hard with finger over the hole, I tested it when I swapped it out. its rock hard with the line pinched at the left...
Still no luck here. Its now isolated to the left front calliper. If I Pinch the line immediately above the banjo connector on that side I...
Im a bit of a magpie to be honest, I see a shiny bike I like and have to have it, so ......I sell a few to fund the next shiny object :) on...
im honestly not attached to most of my bikes, if it came right down to it I could sell most of them and just hang onto 2, one new bike (VFR800)...
LOL, im saving for a more expensive bike by selling the cheaper ones
What a beauty !
No material progress on the VF1kR this past few weeks. I just finished a 2nd set of Carbs, but now I need to finish the 4 into 1 Hindle pipe...
Haven't gotten back to this yet. I got a new bleeder, so will try that as well, but may need to use a Syringe to back feed it
Thanks Guys. will try these when im back home. I have a set of steel braided lines on the way. at this point im certain its an air bubble issue.
are we still talking about brake bleeding here ? left the lever tied back overnight and it was alot better, im away for work for a few days so...
Thanks, yep done all that. tapped the lines, tapped the callipers, when I changed the callipers I had the pistons all the way in. I just...
ok, I did the upper banjo yesterday, will try the others. I may try a syringe and reverse bleed it too thanks!
Well, still no luck. Ive changed EVERYTHING now, master cylinder, both callipers and all the brake lines, 3 full containers of fluid and the...
First set of Carbs are done ! [ATTACH] [ATTACH]
used the plier pinch to test the master cylinder --- Master is good! I pinched the hose right above the right calliper and the problem went away...
Separate names with a comma.
