I had the exact same symptom on my 92 VFR after swapping some parts around. A bad shutter but nothing felt in lever at all. Solid rotors from a...
Tough choices. But that space will be DOPE.
Pretty sure I have used normal cap bolts with no issues. A Torx head would be pretty nice too
That's probably just fine. The only thing I would consider is the depth of the allen hole. If it is less than the original, there's even a...
Of course that's "racing" replacement schedule. Have you ever looked at the racing schedule for a CRF450 Motocross? It was surprisingly very...
Appreciate the posting. SO FUCKING COOL
Reading thru this literature, it is a kit, not a model. You still had to "add" the bike. "This kit was designed for VFR750F"
Nice. Before I discovered you can just swap float bowl locations to defeat the tabs, I used to grind/file the tabs off of the screw caps. Well,...
I'm a little confused. It is so damn hot there, you are concerned about the heat difference just from a different frame color. But routing the...
I have. So many times. In so many threads.
So... you been scrubbing and rinsing and ultra-sonicing... BEFORE accounting for all the parts? ALWAYS extract the washer and orings before...
6mm
Good job! VERY CAREFULLY remove the choke plungers. As straight/perpendicular as you can get the wrench on there. DO NOT apply any twisting /...
Yes. Not a smoking gun, but if it pulled smoother earlier in the ride before getting hot, sounds possible. Especially with resistance readings...
Pulse generators often fail (and test bad) when they are hot, but not always. ALSO... I have seen perfectly working units, hot and cold, test...
Purchased and tracking # already provided. Went for plate only, but anybody probably could have surmised that. ;-) Thanks VRF.
Mequiars Fine Cut Cleaner and then Cleaner/Wax. Don't want to try and get thru the anodizing, just polish away the staining and then give it...
PM sent
Of course you use a torque wrench. And a real mechanic believes that and knows when it is mandatory, and when it is not. Things like heads and...
I have definitely folded over some sandpaper and ran it thru the gap, re-checked the gap and cleaned with contact cleaner. Never had a problem.
Separate names with a comma.
