You have to pull the spacers and calipers off but only put the axle partially in the fork tube. You can slide the axle in and through the wheel,...
Looks like a “T” handle wrench that you’re looking at https://www.harborfreight.com/4-piece-sae-t-handle-nut-driver-set-96927.html
The kit I have has longer hex shafts, probably about 4” Long, the socket doesn’t come anywhere near the fork bottom....
I bought a 3/8” to metric hex wrench set from Harbor Frieght for less than $10, if I remember that correctly, the hex shaft is rather long so it...
Have to say that you’re doing good, I like the pictures and videos too. Pics and videos can be your friend when putting everything back together,...
AM, if you don’t have to change out the fork seals, replacing the oil isn’t that hard. So easy, even Long and I can do it! Still, changing the...
Definitely, one of the nicest and approachable riders you can meet.
This is cool... http://www.motogp.com/en/news/2018/04/20/turn-18-renamed-hayden-hill-in-honour-of-nicky-hayden/255330
PS, if you come by, you can pick up that front fender while you're here!
Hmm, I'd have to question how you're using the stand or what pin you have. I have a Pit Bull stand and find it very easy and very stable once the...
All we need to cut off is the bolt that hits the headers. Personally, I like not having it, peace of mind at the track and as long as I have my...
Come see me, I’ve done this on my 5 Gen prior to my low side, so ironically it was done prior to my header replacement.
Jeff, although I agree with you in regards to speeding, there are sometimes when traffic is moving much faster than the limit, so sometimes you...
I went with a Ram Mount setup for mine. The base plate that I'm using has a magnetic center section and there's a metal plate that you attach to...
It’s 80 ft.lbs. BTW
Noooooo! Oh well, still have two of my own!
Anyone else remember this moto legend? [MEDIA]
Other than getting a good set of wire strippers, ones that have different gauge cut outs work well, practicing on scrap wire first is the best way...
The soldering looks good but I would recommend that you strip back the wire sheathing as minimally as possible, especially if you need to heat the...
Caught both races this morning, great stuff. Rae has been remarkable and really shows he’s the real deal. I cringed when I saw Camier go down,...
Separate names with a comma.
