The carbs aren't too difficult to deal with. They can be a bit fiddly with all of the small springs and parts, but paying close attention to the...
It will do it no matter what you do. Oddly enough, I experienced less of it when I went to 520 conversions using a DID ERVIII. I have set it in at...
Yes, they rotate.
Depending upon the weather the machine is being used in, and lack of maintenance, this can be expected.
The Thai GP has been postponed, as well. Not a good way to start the season, but Marquez and Nakagami won't be complaining about the extra...
If you put them all in a vacuum box and test them for airflow, the stock filter actually flows better than you might expect. Did a test of all the...
Hondabond HT http://prohondaoil.com/maintenance/assembly-sealants/
It is clear as mud now. Initially, I thought you were just going to move the swingarm between the two frames, now I see you're trying to...
What is the year and condition of the tank? Also interested to hear what you mean by parts.
Don't be skeered, it's OK to take pictures with the lights on :D
Sorry about your piece of mechanical archaeology :Laugh: With what you have, you'll make quick work of your stubborn gasket material. Looking...
Glad it worked out for you, I was just passing it along. I originally learned the trick from the man that built my VFR800 engine. I would hang out...
Good question, Karl. Nope, you're not missing anything, that's exactly it. The speedo will read in MPH, but the odo will be spinning in KMH....
A little update...very little. A little progress on the gauge resto. My fab guy finished up the new foam surround pins for the cluster yesterday....
I buy hardware that doesn't incorporate plastic sleeves, they can be a pain, and it just adds another piece to the fastener that has to be dealt...
[MEDIA]
The hacksaw blades are the best, as they are made out of spring steel. Even if you buy a new one and cut it up, it will last forever. The flex and...
This is the best thing I've found for removing gaskets. [IMG] Take an old hacksaw blade, cut it in half, then use a grinder to sharpen to a...
Seriously considered it for my RVF, but decided to keep it looking stockish instead. Maybe someday for me, as well. Have a potential RS500 that a...
Separate names with a comma.
