on a high mile bike in a hot area you might try a 20W-50.
sorry chris, wrong again. keep trying............
service manual is NOT for first gen, which would be 1983-1986:rolleyes:
i'd recommend taking a multimeter so you can test the charging voltage when it's running. anything less than 13.5 volts is a problem.
american legends, duhamel [MEDIA]
^^ what oil have you been using ?
trying a new cap is a good idea.
baking soda and dish detergent lightly rubbed on a faceshield will usually clear them up from fog or cloudiness. baby powder sprinkled inside...
replace the float needles. your feckless brother may have set float levels incorrectly to try to compensate for leaky needles, never a good idea.
paper clip no good ?
cancha download a manual online ?
Bob's used motorcycle parts, phoenix AZ [ATTACH] [ATTACH] [ATTACH] [ATTACH]
why not get a manual ?? you need one. book says 65-77 ft-lbs.
JBWeld works well to stop rad leaks. :drink1:
popped up on local cl https://buffalo.craigslist.org/mcy/d/marilla-honda-vfr800fi-interceptor/7354173500.html
the fan switch has a stamping that indicates the temp set to turn on, often 100C. in this case it may be needed to fully top up the system under...
dozens of models from all the big 'cycle companies used the same-as-ours pump for years and years up until fi came along, so salvage yards are...
^^ it's wise to hook the carbs up to a fuel source for a few minutes on the bench to check for leaks b4 installation.
an industrial O-ring, size -041, will work, is commonly available and costs next to nothing.
unless the slide needle shows obvious wear or damage there is no need to remove it; and if the slide lifts properly and returns quickly there is...
Separate names with a comma.
