The filter shown in the video has a sintered bronze element inside. That's exactly what I use on my bikes.
They are ok, but don't expect any more power from them (probably less in fact). They look good and sound good and seem to hold up really well to...
Gravity feed works great. All of my VF's have been converted and you would never know the difference. Your setup is indeed not stock. What I...
Yep, the parts will fit your bike just fine. Good luck!
Yeah, the valve springs are the root cause of that problem. What sucks now is that you can't get new springs from Honda anymore. That used to be...
A couple of things to keep in mind: 1) A CBR600 or CBR 929 will both need heavier springs along with accomodations for the length difference...
No, I didn't. I custom make the shocks to each persons needs/wants so there are no standard numbers. Something that is often misunderstood is...
Can't you still get one new? I just bought one not that long ago.
Nah, nothing like that. I just think you'll find trail of more than 105mm to be too lazy and lower than 100mm to have difficulty with finshing a...
Yep, just cut the center out! Some silicone sealant should do the trick, though a new gasket assembled dry is really your best choice. My guess...
Very nice! I must admit that I'm quite fond of big twins!
It's a good idea to target a certain geometry, just like you have done. However, don't get too bent out of shape about it. It's better to just...
Yes, thet 86 petcocks are different. You can still modify them in the manner I show on my site. The general idea is the same. That should fix...
Actually, the slow circuit is also used during cruising speeds. Up to 10-15% throttle the mixture is controlled primarily by this circuit....
Tink, you once agian have shown that you clearly do not understand the operation of these bikes! The needles adjust the fuel flow, not air like a...
Since you use a screwdriver to remove and install the pilot jet, I understood that as what he mean. The idle mixture adjustment screw does not...
I think he's talking about the jet itself, not the adjustment needle. I agree with just cleaning it out and not bothering with replacing the jet....
Too bad you aren't in the US as there is a guy giving a VF500 engine away for free!
Yep, your results are very typical for the stock shocks. It not a fluid replacement or rebuild issue, it's more involved than that. The bottom...
Honestly, I've yet to see a bike sell for more in parts than it would whole. Take into account the hours it would require to disassemble, box up,...
Separate names with a comma.
