Always amazed me how 3 guys in Rush could make it sound like 6. Saw the aerial view of Neil Peart's drums in the vid... biggest collection I've...
The service manual says allowable runout is 2mm for both radial and axial runout.... I find that a little excessive, should be half that IMHO....
On my FJR I had a light bar and the amber turns ran as running lights, flashed with the brakes too.... no LEO ever cared and I was all over the US...
After 60k mine looked very good which surprised me, just dusted things off and left all in place, plates had the clearances for the reed screws,...
On my '83 V65 Magna, black engine oxidized and after cleaning it of oil/grease I used something like Back to Black to restore the main cases,...
Oddly enough (and OK with me) we don't talk much Covid19 stuff on this forum, but I found this interesting and reasonable, thought it worth...
Maybe someone else knows better, but the only real difference is the wax motor for the starter valves... you taking your existing '98 TB's will...
OK, that mileage shouldn't be a problem.... compare sprocket to what a new one should look like and good to go.
Likely steel... forgot to ask what the mileage is, how sprockets look for wear.
You don't need an FB account to look at this.... https://www.facebook.com/115030601921102/posts/2898363536921114/?vh=e&d=n
Gear driven cam noise (whine) is on right side. Just had all the plastic off my bike for the last month sprucing everything up.. if something is...
yes check that R/R... I had a signifcance in mine when probing between the 12V + and -. Regulator was warm to the touch, always on... should be...
I make a habit of changing brake and clutch fluid every year, keeps things clean and it is preventative maintenance, doesn't take long if you do...
I don't like the black bits... if you check the three yellow wires to each other for uniform resistance, and each to known good ground to see...
If you have aftermarket springs (usually slightly gauge spring wire), typical oil levels are lower, more like 130mm. Your wee bit low is nothing...
Suggestion..... pull the lever to the bar and zip tie it there, leave it overnight... air will rise to the top. In your case with little/no...
It depends how bad they are..... got a couple of pics?
1/8" or 3mm ID silicone tubing stays on bleeder nipples.. SpeedBleeder sells it as well.
Perhaps refresh the connection to the fuel sender, unplug and replug, to eliminate that as a cause of resistance as well.
Mostly surface rust from having no lube on the link faces and put away wet. Inspect every roller for similar condition. Chain may have been...
Separate names with a comma.
