It looks like they list one for the 1000R. I've sent an email, so we'll see if they still make it.
Now, for only $40.00 (plus shipping and handling, available only on Ebay, you too can own this matched set of pipes and look like a squid too!...
I kinda thought that was the case.
Is it the same as the 1000F? I still have the stock rear wheel that I'm not using and I believe the rotor is fine. I can check it out later if needed.
Now where did I put my old unicycle? And my cup!
I did it to mine (stole the idea from the racing Hondas 20+ years ago) at about 30,000km and it has over 100,000km now (lots of racing miles on...
I'd leave the fan on and hook up a manual switch for it. When you start making some real HP it will heat up more. Waiting on the grid, the cool...
That's the way I would do it. I've used a large C-clamp and to pop the bead off (use it in a few spots), use a towel to keep from scratching the...
I'd recommend replacing the stock fork fluid with 10wt and see how it feels. I don't pump up the air in the forks either. You might also consider...
The next step will be checking the brake system. The fluid will more than likely be bad and the calipers should be taken apart and serviced....
Check with VF1000RS and his mutant 1000R. http://vfrworld.com/forums/member.php?u=6554
I'd steer clear of the Dynojoke and go with a Factory kit. Lots more jets and way better quality.
Blow dryer to heat them up, peel the stickers and use goof off, goo gone or WD-40 to remove any residue, then apply wax to protect the paint.
See, That's what I said! I had them for my racebike too (among many, many others over the years) . Shouldn't have included them when I sold it....
Go to a track and check out what's being used. Pitbull is very popular, not as pretty, but very sturdy. Woodcraft is good too, but they don't make...
I took it as 2100, or 9PM. He said he was at 9K rpm.
Good answer! Learning is always a good thing. I'll have my VF1000F going again next season, we'll have to meet up sometime on 50. When I was...
I'll vouch for the SV650, it's a great bike. Cheap to get into and it's fast enough to be fun. When I got back into racing, I got one and had a...
When joining a new group of riders, it's always a good idea to check their tires to see how far they lean. If the "chicken strips" are a mile...
Definately the clutch switch. You can try spraying some WD-40 onto it and then work it to see if it comes back to life. You can also replace it,...
Separate names with a comma.
