If I didn't have the GPS on top of the Triple Clamp I would have installed the HESD. I machined all the mounts and built a manual electronic...
Yes, I have it bolted to the fairing bracket, so far it don't move but next time I have the fairing off I'm going to brace it so there's no chance...
I machined some mounts and fitted a 1098 Steering Damper, it rides sweet now no more crosswind weaving and it feels rock solid, best $15 I ever...
Anyone have 2 junk front turn sigs? I just need the 3 wire sockets from the fronts VFR700 or same type. thanx
Very cool, nicely done, lots of work!
Check all the related wiring, tap on the spark box wiggle the connector see if anything changes while running.
I had a local parts guy order me new ones from Tucker Rocky about $7 each, (NOTE) the parts number was wrong, I can't remember the deal but the...
I bought new ones but drilled them and installed aluminum rods so they will never droop or bounce. Should work on old ones maybe heat them and...
I wanted a 87, since I was painting RWB that wasn't a issue, I liked the 87 gauges everything fits better and the other improvements don't hurt,...
Looks like a good deal, I'd buy it.
I'd pass on it, get a 86 and up, any old bike I've looked at that sat usually needs tires, chain, batt, carbs rebuilt, tank cleaned, lots of...
I get 54 mpg at 70 to 75 mph on the freeway, exactly what the magazine testers got in 1987.
The swingarm is no issue even with a wider tire, notched the chaingaurd 1/3 inch, machined the reaction arm about 6 mm to clear tire by about 6mm,...
I gots me a trailer with outdoor plumbing and a HD toilet seat.
I had a 90 CBR1000F and a 600F2 with the white wheels, lots of cleaning but they look cool
170/60-ZR17 and 110/70-ZR17 Conta Road Attacks, found them new fresh date code for $200 shipped for both. Ride height seems near the same with...
It took me a couple monthes to do the mods I wanted and make the DRZ400E street legal, I have about 2k miles on it now, running strong with the...
After much machine work and measuring it's done, CBR1000F 94 5.5 wide rear and what must have been a Hurricane 1000 NOS front because I had to...
Separate names with a comma.
