Works on ABS, but in this case when the panel is fibreglass, not so much. On ABS you can also make a paste/glue from Acetone & ABS shavings ....
I have made a few of these using PLASTEX fairly straight forward. Heat up the moulding bar and press it around the good post to get the shape....
Got my proof finished, jacket goes to production now [ATTACH]
Ad reads like the whole lot is included. id grab that lot for 250 all day long
Lucky man ! very nice
You guys are too harsh, that baby will buff right up.
Cheers Rogue !
Im having a vintage style Honda jacket made to go with my NS400R. its based on a few Freddie Spencer's NSR and VFR suits all combined to what I...
glad you're making progress !!
Im no expert on the bearing fit or machining, but is it possible to pean the inside of the wheel/bearing housing ? that may raise the surface...
Hi there, on one end of the needle is the Viton rubber tip, on the other end is a spring loaded plunger and a wire hanger that hooks over the...
Just to add that, the plunger on the needle shouldn't be full depressed, just lightly seated. again, if you hook up a clean fuel line and blow...
Likely OEM. The tests mentioned earlier -- blow thought and also leaving the carbs in the washing basin attached to the fuel bottle will tell you...
Nope, wrong way round, the float tab touches the button on the needle to close the fuel flow. if you connect a clean section of fuel hose and...
she's gonna be sooo nice Rogue !!
There are some excellent youtube videos by a guy " MagnAndy" who takes you step by step on taking them apart, cleaning and re assembly (15 videos...
I had issues where cylinders were firing and then went dead. turned out the carbs were dumping too much fuel and flooding cylinders out....
Hmmmm. Sounds alot like the issues I was having with my GSXR750. I chased everything on that and it was fueling all along. All the advice...
He has 3 or 4 different VR46 gloves available, I may go for a set of the yellow if these ones work out ok (but will change the palm leather from...
I admit I have a problem, therefore its not a problem.
Separate names with a comma.
