Pre 06 bikes have major connector issues. This can lead to a shorted connector then burnt up stator. But after 06 the connector issue seems to be...
Your injectors run about 70% at 14000rpm on a stock 6th gen ( oscilloscope tested and used a pwm duty cycle meter). The problem you will reach is...
Power loss after extended down shifting is a evap issue. If you still have the evap system in place look for a vacuum leak or a disconnected purge...
Dont compare to house wiring! Not the same and in a very different system. Ac power has a duty- cycle of 50% (loose theory). This means that a...
Fuses. But since things went all melty I suggest you dig out the multimeter and find all the shorts and "fixes" that have been done to that bike....
The last two posts are very common issues with early 6th gens. Also, make sure the battery negative is properly connected to the frame and to the...
That is way overkill. Unless you have cronic electrical issues that are killing your battery/ charging system.
Randy, I have ordered a few weather tight usb connectors. Any 5 volt dc supply with less than 0.1% ripple and able to provide 100ma more than your...
On negative frame electrical, always fuse and switch the positive side of the circuit. This is because most automotive devices use their chassis...
They are identical bikes so bags can move over (just repaint them). Besides the wiring being slightly better, post 06 bikes have only ecu...
For scratches and light swirls, I use mcguires. I know a couple detailers that use their products and never have had an issue. For wax.........
35miles hiway is bad since most of us are getting mid 40's or better. The most common issue any efi controlled engine can have is bad...
Battery----fuse --------switch -------- device -------- frame. This will not handle more than 10 amps without getting warm. Limiting factor is...
So your going to fedex that to reg on a next morning delivery for r3-2014?
The throttle should snap back to idle without issue. The 6th gens use two cables. A draw and a return cable. Make sure that both are free in the...
Welcome to the wiring nightmare! Most problems can be solved by cleaning the contacts of the connectors. If your close to a large body of water...
Welcome to the club, Good find! Bike #3 I have #18.
Do yourself a favor and buy a automotive relay and an in line fuse holder good for 20 or more amps. Connect the relay coil to the low beam...
While your doing that reg, please change my order to my second post, forgot to select colors. And of course I didnt edit my post because I know...
1 hoodie black or dark blue XL 2 t shirts, one white, one black both XL I'll paypal the funds asap, at work right now
Separate names with a comma.
