thats right, the garbage in the middle isnt needed. one of the exit pipes is bent, the other is straight. i left them as they were and cut out...
ouch! thats aiming below the belt billy
its part of the bi annual fairing removal. oil, coolant, cleaning, electrical check.
I wouldnt call you to work on any locomotive if you use spin on oil filters for them. We have a mix of Alco, GE and soon GM and all use a massive...
there isnt always a button big enough for the moment.
93 octaine is too high for these engines unless your running at wot all the time. i have found that the 87 octane we get out here is fairly close...
i did a total gut on my 07 stock exhaust, not too loud but noticeable. all i left in wast the resonator pipes on the endcap. these tune the pitch...
mine are single filment. only two wires and no frame these use a simple reyal and drop resistor circuit.
Mine light up. Check the signal relays. Found under front cowl. Could also be signal diodes or simply a bad ground.
I will check when I get home, in a couple hours.
A little seafoam and some time putting the bike through its paces could have saved the tear down. But either way good to hear you got her fixed...
Just over 25k km on my 07, I took one side apart to get an idea of if I needed to shim or not. Needless to say I shouldnt have bothered. Can you...
It may not lift doing that. Problem is your weight is leaning forward and going from 4000 to vtech (6400/6800 year specific) has a horrible flat...
There are some sources in japan if you can read japanese, google has a hard time translating the pages. Short of that, try motorcycleparts.com I...
Billy is a wealth of information, but if hes almost never serious. Some you take with a pinch of salt, billy needs the whole spice rack. Fear...
And find a crappy bike to learn on, no sense destroying your vfr if there is a cheap throw away available.
Not sure if it can be done on the 5th gen, but on the 6th gens we can switch between imperial and metric by pressing and holding the left button...
There is some cross linkage on the left side. That may need some attention. The return spring is there as well. Make sure it is working...
The two different lengths are required, but good news the long ones only hold everything snug if in the right place. Billy, no pix for you! I...
Not sure where you are, but up here I usually find the expensive tools at a place called princess auto. They do mail order and you can order...
Separate names with a comma.
