Sometimes when the carbs sit empty for a while, the gasket will dry out and leak. Often just getting them wet with fuel will allow them to fix...
^ What he is saying is quite true and would explain the fuses no blowing.
I guess the next step would be to disconnect the 6P plug to the tail lights to see if that helps. If not move on to the other circuit and...
Darn, nobody warned me that it was going to be a mini series. I hate waiting to see what happens until next week. Good luck with the surgery and...
So when bike is warm, it acts like a weak battery and doesn't turn over? If so, try boosting it to see if it works. I take it that you...
Sounds like you have a short, but seems strange that a fuse isn't blowing. Now to find out which system is the culprit. Because the ignition...
It is not common, but yours' is not the first. It could be just the wiring or connector. You won't know until you get at it. Now that you have...
??? The silicone, or other sealant is a requirement for connections that are exposed to weather in aircraft maintenance. It works very well at...
Yeah Tink, that's a little hokey, sort of like conventional electron flow. If you want an even more weather proof connection, apply a little RTV...
The 14V can be attributed to an out of cal meter, or a battery that just came off a charge (not rested). I am going to assume you know how to use...
I have an 1100 and think it is a great 2up bike. Truly a bike you can ride all day and still have fun in the twists. Like the VFR, it only feels...
Not the bowl, but in the float. Sometimes they can leak and if they fill up with gas, they won't float anymore.
If there is no fuel in the floats, then the valve, the float operates, is not closing properly.
A loose cuff can cause idle problems. If you're itching, you could check the air filter and plugs, as you didn't mention them in the o/p.
That does blow. Maybe you can link it back to the swarf recall and get a free engine out of this. Time to make some noise.
Battery positive to the positive post of the starter. Just pull back the rubber boot and contact it to the post. Make sure the bike is in neutral...
If the relay clicks, then the safety switches are good. The next step should be to use a jumper cable from the + battery post to the starter, to...
Hopefully the kill switch is in the run position. It would probably be easier for you to download the service manual and follow the...
After you get it fixed, you should still not rely on the bike to charge a weak battery that has been sitting around, too long. It's just too much...
The tank was off the bike and sitting on the floor, for maintenance purposes. Little Peggy, who was not really that little, stepped on it while...
Separate names with a comma.
