There is a guy in Bethany that has all the decals as well. www.cbdecals.com
Also make sure that the eccentric is below the centerline. If it is above the centerline, the chain MAY be pulling the eccentric forward, if it...
Don't the two hose clamps move the rear cowl out? When I installed my ELKA shock I tried the resevoir there, but the hose clamps pushed the cowl...
it is also easier to get the battery terminal bolt in if you put a small piece of vacuum line under the nut to hold it up on the battery terminal....
Take the lower rear shock mounting plates off and turn them around, that will get you about 3/4 of an inch for free.
You don't need to remove the tank to change the shock. Just loosen the front bolts, remove the rear bolts, and put a piece of wood under the rear...
I think the truck driver simply mis-timed the movement of the bike. The bike started across to the other lane, and most likely slowed a bit for...
A 140/80 is the same width as a 140/70. The aspect ratio (the 70 or 80 part) is the percentage of height to width. The first part is the width...
Did you click on the 84 VF1000F? Try http://pickbbs.com/vf1000f.jpg then.
The Hondaline one I have is two chrome rails, with an aluminum plate that connects them. The side rails attach to the frame at the front, and to...
And the mount looks nothing like the 1000f one. The 1000f one is three piece as well.
If is has the same type calipers that the 1000R and 1000F has, then you also want to make sure the slider pins are free on both calipers. They...
No need to convert the speedo, it has both numbers already on it. Besides, Canadian Tire (the only place that can do the federal inspection) will...
We have only one tenth the population to fund it. Even though the claims are one tenth here, the profit would also be one tenth as well (all else...
Maybe it is just me, but, how do you ride a new bike for 30 miles and never look at the gauges? Since you did not notice the fuel level until you...
why not just pull the slave cylinder off, take the push rod out, then try it on the center stand (without using the clutch at all)? If you can...
It is not a matter of being ripped off, it is more a matter of the vendor selling it for what he wants. This is what makes our system what it is...
Valve is there to reduce intake noise. I think what you are hearing is normal for the valve. Mine also would open and close with the clutch...
The Dukes of Cycles is the one around Toronto. Because Canada is a somewhat large area, it is hard to predict what area you are in.
I find the main thing to keep in mind is that your leg is doing all the work. Keep your right hand as close to directly above your right foot at...
Separate names with a comma.
