I would plan a little more time around deals gap so you can at least run the Cherohala Skyway and 28. Both better than deals gap btw. I'd also...
It eliminates the need to constantly pump the lever and if there is any air still trapped, then usually it will push it out. I know you think...
You aren't going to be able to push the rod in by hand. You could try getting a large syringe filled with brake fluid , hooking a tube to it and...
The rod seats into a joint that pushes the clutch plate releasing tension on the clutch discs allowing the gear changes. The clutch rod aught to...
Also check the main 30 amp fuse on the starter solenoid. May have nothing to do with it but mine has been giving me problems and it's worth a...
Is there a possibility that when you put the slave cylinder back together that you didn't get it together correctly? Maybe the seal on the piston...
I've bled many a clutch and brake systems and have had to bleed the lines. And you don't have to replace the washers. It may be a good idea, but...
The banjo bolt is the one at the reservoir (where the master cylinder resides) where the line bolts up. Sometimes air gets traps there and is...
Ok. When you are bleeding the clutch, are you leaving the bleeder screw open? If you are, then that's your problem. You bleed the clutch or brakes...
Definitely NOT stock! Great buy though, congrats.
The J.I.S. screwdrivers are awesome. The screws on japanese bikes with the little dots on them(like on carb bowl screws) are j.i.s. Harbor Freight...
Makes my head hurt just thinking of the nightmare involved to do that. Awesome though!
I'm really hoping I'll hate it so I won't be tempted to buy one. I doubt that will happen though . Sent from my XT1080 using Tapatalk
Very cool! Looks like it'd be fun.
No, jumping out of gear is strictly a trans problem. Engine "wear" has nothing to do with it. You either have worn parts, or a bent shift...
Sounds like the dogs on second gear are worn. [ATTACH] I'm not sure which gear is second in this diagram, but look at gear #12. The three dogs...
That looks like a good product and it may work better. The problem with the c d is sometimes it puts pressure on the grips and pulls them in...
I've used Canyon dancers many times with good results. The only problem I've ran into is the grips being pulled around and squished. I like them...
I rigged up an R1 pipe on mine. I just have the exhaust running through the left side because it's easier. I got them for free from the dealer...
I don't really care what anyone wants to wear. None of my business. If one wants to go helmet-less or glove-less or whatever, it's not for me to...
Separate names with a comma.
