Ignition coils of '85 and '86 have the same part number and I believe there is no reason for the advance to be different. In every manual I have...
I am considering fitting a VTR100SP (SC45) shock. Any thoughts about that?
You asked for it... it is the one I will restore, the second is in much better condition. [ATTACH] [ATTACH] Did I hear a squirrel? or...
It sounds asymmetrical because of the V 90 degrees, something like twice a H.D. but more consistent and without misfires. I had a "blitzas"...
Decal update: Through discussion with decal professionals I came to conclusion the original decal must be a print over a transparent film. That...
Last call for a '86 petcock for this beauty
I would go for the 3 lines. Certainly aesthetically better. 2 lines are just cheaper due to less components. Fluid flow is very small if system...
Originally yes BUT the new arrangement is as I described above... just read the auction: "FEATURES * Galfer braided stainless steel front...
One line goes directly to one caliper so 2 calipers=2 lines I think front and rear calipers are identical but you can check part numbers.
For the second question, I have seen nothing else for VF500 but: 17 deg@1700rpm - for F mark 37 deg@3300rpm - full advance If you have a...
From the Honda manual I have which might be the European version: Model No. VD41A - 30mm Throttle Bore, 6.8mm Float, 95F/92R Main Model No....
If I was in US I would consider the modification option but for me it is not feasible. I have already read all valuable info provided at above...
I am searching for the specs of original shock. My bike came with an after-market shock which is now in unrepairable condition, though I am not...
My photos are colored but the subjects are not :smile: There is also the wing version of "Metallic Charcoal, Silver and White" which was what...
Tweaking the photo-tracing posted by invisible cities to get the vertical measurement I got a reading about 95mm, so I came to conclusion the...
Today I received the decals (bought from ebayer). Inconsistencies to the original, as far as I know, are: 1. Size is 122mm x 88mm instead of...
Don't know what I was thinking! Above posted part # are for SPEEDOMETER CABLE !!! My apologies for misinforming :embarassed: Choke cable has...
Correct part # is 44830-MF2-000, replaced by 44830-MY9-750 according to this Also found the 44830ML4405 which supersedes the latter.
I don't know what to wish for now :rolleyes:... leak or not leak? :confused: Just kidding, I hope your troubles are over :smile:
Can you please measure the length of the bronze pipe? from mating surface to the end of the pipe. Thanks.
Separate names with a comma.
